Roofing Products

 

  Product Description & Use

#298

Asphalt Emulsion

Availability:
Bulk, Totes, 55gal Drums, 5gal Pails

 

Data Sheet
Download PDF
Material Safety Data
Download PDF

Western Colloid’s #298 is a premium grade, clay stabilized asphalt emulsion. It is produced in a continuous colloid mill process without any surfactants or additives. It meets ASTM D 1227 Type III. #298 Asphalt Emulsion is a superior waterproofing and weather resistant surface when compared to standard Hot Asphalt (Oxidized) with greater resistance to ponding water.

      Uses:

  • A uniform weathering surface for smooth or mineral surfaced composition built-up roofing.
  • Waterproofing compound for cold Fluid Applied, built-up roof systems utilizing polyester and or fiberglass reinforcements.
  • Protective surface for metal roofing, masonry, stucco, parapet walls, curbs and base flashings.
  • Corrosion resistant base coat for exterior metal surfaces.
  • A damp proofing compound for below grade walls.

#298E

Elastomeric Asphalt Emulsion

Availability:
Bulk, Totes, 55gal Drums, 5gal Pails

 

Data Sheet
Download PDF
Material Safety Data
Download PDF
Western Colloid’s #298E is an elastomeric modified, clay stabilized, asphalt emulsion. It’s premium acrylic rubber modifier gives it unique characteristics. It has greater toughness, more flexibility, elongation and adhesion, especially in cold weather.

 

    Uses:
  • Same uses as #298 with greater flexibility, toughness and adhesion in cold climates and anywhere a higher degree of performance is required.

#525

#530

 

SilverWhite Aluminum

Roller & Brush Grade

Availability:
Bulk, Totes, 55gal Drums, 5gal Pails

 

Data Sheet
Download PDF
Material Safety Data
Download PDF
Water based aluminum asphaltic emulsion. #525 SilverWhite is an aluminum elastomeric reflective coating with high degree of reflectivity and weatherproofing. It is manufactured from ASTM D 1227 Type III asphalt emulsion, unique resins and highly polished aluminum flake. #525 SilverWhite is an economical yet durable reflective coating. It will give many years of protection to most asphalt surfaced roofs.  #530 is specially formulated for roller & brush application.

 

    Uses:
  • Emulsion & Asphalt built-up roofing.
  • Metal Roofing

#720 ARC

ElastaHyde

White Elastomeric Reflective Coating

and Membrane (when reinforced)

For Most Types of
Asphaltic Roofs

Availability:
Bulk, Totes, 55gal Drums, 5gal Pails

Data Sheet
Download PDF
Material Safety Data
Download PDF

ElastaHyde #720 ARC is a 100% acrylic, premium grade, white elastomeric reflective coating. It Meets and exceeds ASTM D6083-97a for 100% acrylic roof coating. Designed for use on Fluid Applied, Built-Up, Modified Bitumen and Metal roofs. It is also an excellent coating for existing Polyurethane Foam roofs.  ElastaHyde is manufactured from premium resins, pigments and components producing an acrylic coating of the highest quality. ElastaHyde is a durable coating that will resist rigorous weather conditions while protecting roof surfaces and contributing to substantial energy savings. ElastaHyde #720 ARC will reflect over 84% of suns rays in white. Western Colloid has determined that ElastaHyde #720 ARC meets the ENERGY STAR © guidelines for energy efficiency (white only). It meets the requirements of a “Cool Roof” and is listed by the Cool Roof Rating Council as required by California Title 24.

In addition to white, ElastaHyde #720 ARC is available in "California Tan" and "Platinum Gray" which also meet California Title 24 requirements.

Standard and custom colors are available.

#790 AFC

ElastaHyde

White Elastomeric Reflective Coating

and Membrane (when reinforced)



Spray Polyurethane Foam
& Roof Coating

Availability:
Totes, 55gal Drums, 5gal Pails

Data Sheet
Download PDF
Material Safety Data
Download PDF
ElastaHyde #790 AFC is a 100% acrylic, premium grade, white elastomeric reflective coating. It Meets and exceeds ASTM D6083-97a for 100% acrylic roof coating. It is an excellent coating for use on new, uncoated Sprayed Polyurethane Foam. It is also used on Single Ply Membranes, Built-Up, Modified Bitumen and Metal roofs. ElastaHyde is manufactured from premium resins, pigments and components producing an acrylic coating of the highest quality. ElastaHyde is a durable coating that will resist rigorous weather conditions while protecting roof surfaces and contributing to substantial energy savings. ElastaHyde #790 AFC will reflect over 84% of suns rays in white. Western Colloid has determined that ElastaHyde #790 ARC meets the ENERGY STAR © guidelines for energy efficiency (white only). It meets the requirements of a “Cool Roof” and is listed by the Cool Roof Rating Council as required by California Title 24.

 

Standard and custom colors are available.

QS - #790 is available in a Quick Set formulation "ElastaHyde #790QS". It is designed to set-up faster, making it more resistant to wash-offs due to rain.

#770 AXP

ElastaHyde

White Elastomeric Reflective Coating, Base Coat and Membrane (when reinforced)


Smooth, Mod. Bit., & Ponding Surfaces


Availability:
Totes, 55gal Drum, 5gal Pails

Data Sheet
Download PDF
Material Safety Data
Download PDF
ElastaHyde #770 AXP is a white acrylic elastomeric reflective coating. Designed primarily for use on smooth, Modified Bitumen and Asphalt roof surfaces, it also works extremely well on Single Ply Membranes, Built-Up and Metal roofs. ElastaHyde has excellent adhesion to smooth asphalt surfaces such as asphalt emulsion and APP Modified Bitumen. It has far greater resistance to ponding conditions without blistering and wrinkling. It cures faster than most Acrylic coatings and is an excellent choice for wet climate conditions. ElastaHyde #770 AXP is an extremely durable protective coating that will reflect over 83% of suns rays in white, which can contribute to substantial energy savings. It meets the requirements of a “Cool Roof” and is listed by the Cool Roof Rating Council as required by California Title 24.

 

Standard color - White

ElastaHyde #770 AXP performes best when used as a base coat with ElastaHyde #720 or #790 as a surface coating.

#800

Elastic Cement -   #800W = White

                               #800B = Black

Availability: 3½ gal. Pails

Data Sheet
Download PDF
Material Safety Data
Download PDF
Water based, flashing, patching and sealing compound. Manufactured from a premium Latex rubber that remains permanently elastic. #800W has excellent adhesion and elongation, even in cold weather.

 

For long lasting repairs to roofs, sheet metal, concrete, mobile homes and air conditioning ducts.

#800B Same as #800W except black in color. Dries faster in cool & cloudy weather. Used for prep and flashing on cold process systems that are to be top-coated.

#8000

All Weather  Elastic Cement - White

Wet or Dry                              

Availability: 3 gal. Pails

Data Sheet
Download PDF
Material Safety Data
Download PDF

8000 is a unique, solvent-based, white sealant. Designed for use on various roof membranes and surfaces, including asphalt BUR, modified bitumen, metal and single ply roofs. (Including EPDM, PVC, TPO and Hypalon).

8000 forms a long lasting seal that will outperform asphalt based sealants.

8000 has special additives which allow it to be applied to wet or underwater surfaces.

8000 is waterproof immediately upon application and can be used before or during wet weather.

 

Polyester Fabric

WCP-SS  -  Standard Soft  (#325)

Availability:
10 squares (1080 sq.ft.) = 40" x 324'

Data Sheet
Download PDF
Material Safety Data
Download PDF
WCP-SS - Standard Soft: 2.75-3oz. Standard-weight Stitchbonded Polyester Fabric with a soft finish. WCP-SS has good strength and elongation. WCP-SS has excellent conformability especially on rough surfaces. WCP-SS works well when used over vacuumed, spudded or filled gravel surfaces. It has fewer stitches per inch which allows for better wetability which requires less brooming. Also known as TieTex T-325 Soft.

 

Polyester Fabric

WCP-SF  -  W-26  - Standard Firm

Availability:
10 squares (1080 sq.ft.) = 40" x 324'

Data Sheet
Download PDF
Material Safety Data
Download PDF
WCP-SF – Standard Firm: 2.75-3oz. Standard-weight Stitchbonded Polyester Fabric with a firm finish. WCP-SF has good strength and elongation. WCP-SF has good conformability on smooth or semi-smooth surfaces. WCP-SF works well when used over smooth or cap sheet surfaces. It has fewer stitches per inch which allows for better wetability which requires less brooming. Because it has a firm (starched) finish it will have fewer wrinkles and will lay straighter during application. This is the practical choice for use over most smooth or cap-sheet roofs. Also known as W-26 or TieTex       T-326 Firm.

 

Polyester Fabric

WCP-HS - Heavy Soft   (#272)

Availability:
10 squares (1080 sq.ft.) = 40" x 324'

Cut Widths: 20”, 12”, 6”, 4”  x 300’

Data Sheet
Download PDF
Material Safety Data
Download PDF
WCP-HS – Heavy Soft: 3oz. Heavy-weight Stitchbonded Polyester Fabric with a medium soft finish. WCP-HS has excellent strength and elongation. WCP-HS has good conformability on smooth or semi-smooth surfaces. This product works well when used over cap sheet, smooth and spudded or filled gravel roofs. WCP-HS has more and closer stitches which may require increased brooming to insure proper embedment and removal of all air pockets. WCP-HS also comes in cut width rolls which are excellent for flashing, seams, walls and metal roofs. Also known as TieTex T-272 Soft.

#850

SWS - Seamless Walkway Coating

Colors - Burnt Yellow & Gray

Availability: 5 gal. Pails

Data Sheet
Download PDF
Material Safety Data
Download PDF
850 SWS a unique, water based coating designed to protect walking areas and paths on smooth roofing systems. It can be used on coated roof systems as well as approved single ply, modified bitumen and BUR roofing.  It is formulated with extremely tough resins to form a long lasting walking surface. 850 SWS contains an aggregate to form a textured non-slip surface with very high abrasion resistance. It will protect the roof surface from damage due to foot traffic.  It also provides a non-slip surface adding an extra level of safety for personnel. 850 SWS can be reinforced with polyester fabric to provide an even greater level of protection from puncture and equipment damage in areas of high abuse.

#900

MTL + Bonding / Divorcing Primer

Availability: 55gal Drums, 5gal Pails

Data Sheet
Download PDF
Material Safety Data
Download PDF
#900 MTL + Bonding/Divorcing Primer is a very versatile water-based primer.  Adheres to difficult metallic substrates. Gives good corrosion resistance over carbon steel.  Has excellent adhesion to most single ply membranes, smooth and or granulated APP, SBS, Mopping Asphalt and Asphalt Emulsion surfaces. Can also be used to divorce asphalt products from reactive compounds.  #900 also aids in the adhesion of acrylic coating in ponding conditions.

#900R

MTL + Rust Primer

Availability: 55gal Drums, 5gal Pails

Data Sheet
Download PDF
Material Safety Data
Download PDF
#900R MTL + Rust Primer is a water based, acrylic emulsion, rust inhibiting primer.  Not only adheres to difficult metallic substrates, but also gives good corrosion resistance over steel..  Formulated with a unique polymer that is designed to react with lightly rusted steel to form a bond and provide anticorrosion protection.

#950

Primer / Sealer - Stain Blocker

Availability:
55gal Drums, 5gal Pails

Data Sheet
Download PDF
Material Safety Data
Download PDF
#950 Primer/Sealer - Stain Blocker is a water based, clear, acrylic primer/coating. It is formulated with premium acrylic resins that are designed to stop asphalt residues and oils from staining the acrylic coating system. #950 Primer/Sealer also aids in the adhesion of the acrylic coating to certain substrates such as granulated roofing. #950 Primer/Sealer should be used as a primer coat over existing asphalt roofing, mastics and coatings where staining of the acrylic coating system is a concern. Use over existing solvent based asphalt mastics and coatings on Western Colloid metal sealing systems.  -  For increased adhesion to smooth asphalt surfaces or ponding conditions use #970 A2A Bonding Primer.

#970

"A2A" Bonding Primer

- Acrylic to Asphalt & Ponding Primer -

Availability: 55gal Drums, 5gal Pails

Data Sheet
Download PDF
Material Safety Data
Download PDF
#970 A2A Bonding Primer (Acrylic to Asphalt) is a water based, clear acrylic primer.  It is formulated with premium acrylic resins that are designed to improve the adhesion of acrylic coatings to smooth asphalt products.  #970 A2A Bonding Primer is designed to be used as a primer coat for ElastaHyde over smooth (non-granulated) asphalt roofing such as APP, SBS, Mopping Asphalt and Asphalt Emulsion.  #970 A2A Bonding Primer also aids in the adhesion of the acrylic coating in ponding conditions over most substrates.

#925

Clear Skylight Coating

Availability: 5gal Pails

Data Sheet
Download PDF
Material Safety Data
Download PDF

#925 Clear Skylight Coating is a water based, clear, acrylic coating. It is formulated with premium acrylic resin, to form long lasting clear surface on aged and worn fiberglass skylights. When applied properly it will give worn fiberglass skylights additional years of useful life. Clear Skylight Coating may also be used as a clear sealer on other surfaces such as wood and masonry. (not for acrylic skylights)

#901

Clear Rock Binder

Availability: 55gal Drums, 5gal Pails

Data Sheet
Download PDF
Material Safety Data
Download PDF
#901 Clear Rock Binder is a water based, clear, acrylic coating. It is formulated with tough acrylic resins, to form a long lasting clear binder on gravel roofs. When applied properly it will secure loose gravel, preventing bare spots, membrane burnouts and loose gravel in gutters and on the ground. It will also enhance the color of the gravel. It may also be used as a sealer and water repellent on masonry and plaster surfaces.